Licence Card Automatic Recognition Remote Access Control

Automatic induction door attendance system

System architecture (buried):

The antenna is an iron Buddha line (thinking that the seam is very fine, using thin lines), buried, cutting a knife 3-7 cm deep along the marble seam, the antenna is buried in the gap, after installation, there is no equipment installed. The antenna is connected to the tuning box, and the tuning box is connected to the RVR1-MS remote reader using a Cat6 network cable. The remote reader is connected to the network controller through Wiegand, and the network controller is connected through the TCP/IP network cable. Into the LAN to manage the computer.

System implementation:

The person carries the card and starts to sense about 1 meter from the induction area. The sensing height can reach 2-3 meters without external interference factors. All the people carrying the card are legal persons. As long as the carrying card passes through the sensing area, the attendance can be automatically checked. No need to go to the brush, many people crowded in and out without missing reading. Make sure it is 100% recognizable. Cards cannot be placed with metal objects. Metal objects can affect card sensing performance and sensing distance.

Inductive card product features:

1. Radio frequency signals generated by card readers and proximity cards work for low frequency bands and do not harm the human body because personnel spend most of their time in this signal range and cannot abandon all of them for the convenience of management. Safety.

2. The proximity card does not work in the sensing area.

3, the appearance of the proximity card (general people carrying the choice of two TV1 and TV6)

The photo above is a TV6 series card with an identification PVC card inserted. There are two ears to choose between hanging or hanging. The card battery can be replaced by itself.