What are the characteristics of IC card embedded access control system

The IC embedded, networked elevator floor control access control system writes IC cards using the permission of not authorizing the network, and the access controller uses the IC embedded door machine and the computer for network authorization, and the authorized card can be opened by the corresponding door. A minimal authorization system must include a card issuer, an IC embedded access controller, and several IC cards.

Card issuer: The hardware is the same as the IC embedded access controller, but it has different functions. The card issuer connects the software on the computer desktop for authorized card issuance and other operations.

IC card embedded access controller: installed in the access control position, you need to use the mother card authorization to install and use. The elevator controller must be controlled by the IC embedded access controller. An elevator controller and an IC embedded access controller are installed inside the elevator car. The authorized card is swiped in the IC embedded access controller and connected to the elevator control through 485. Opens the corresponding floor.

Embedded Access Control Features:

1, the amount of cards issued can reach 10,000 or more;

2, can be issued offline;

3, can report the loss of the line, solution card (requires infrared receiver, through infrared remote control operation);

4. When the card is issued offline, you can set the opening permission of the card;

5. Use the proof card to proofread the clock (available when not connected to the Internet);

6, easy maintenance, hardware set the device address code, when the device has a problem, as long as the replacement of a device with the same device address code;

7, using the IC read and write methods, user rights and data stored in the IC card, not due to damage to the controller to affect the card reader or recovery card.